On 23rd, June, 2016, the order from Philippines of purchasing BRD steel bar truss decks is ready for delivering. In the morning, two 20 ft containers arrived in BRD company and workers had already waited there for loading. At 10:00 or so, the loading began. At the end of the day, BRD steel bar truss deck went on the way to Philippines.
The loading pictures are below.
The steel bar truss deck is a kind of built-up plate which consists of the steel bar truss and the zinc coating profiled steel sheet.
Steel bars are made into the steel truss and then welded onto the zinc coating steel sheet. Because the deck can bare the construction load, it can be directly put on girders. After the simple re-bar-tying work, workers can directly pour concrete on the truss deck. The application of the steel bar truss deck greatly reduces the workload of mound putting and tear-down. In a word, it can help increase the work efficiency and advance the project period.
Advantages:
1, Steel bars are evenly arranged and the bearing mode is reasonable, which greatly reduces the engineering quantity of temporary support.
2, The double edgefold design can effectively ensure the quality of the engineering.
3, It can shorten the time by reducing 60% to 70% work load of binding steel bars.
4, It has the same mechanical properties and fire resistance as that of traditional cast-in-place floors. Because the bottom mound does not join in the load-baring, it is unnecessary to consider fire proof and anti-corrosion.
The loading pictures are below.
The steel bar truss deck is a kind of built-up plate which consists of the steel bar truss and the zinc coating profiled steel sheet.
Steel bars are made into the steel truss and then welded onto the zinc coating steel sheet. Because the deck can bare the construction load, it can be directly put on girders. After the simple re-bar-tying work, workers can directly pour concrete on the truss deck. The application of the steel bar truss deck greatly reduces the workload of mound putting and tear-down. In a word, it can help increase the work efficiency and advance the project period.
Advantages:
1, Steel bars are evenly arranged and the bearing mode is reasonable, which greatly reduces the engineering quantity of temporary support.
2, The double edgefold design can effectively ensure the quality of the engineering.
3, It can shorten the time by reducing 60% to 70% work load of binding steel bars.
4, It has the same mechanical properties and fire resistance as that of traditional cast-in-place floors. Because the bottom mound does not join in the load-baring, it is unnecessary to consider fire proof and anti-corrosion.
